Drift king sticker

•High quality interior & exterior vinyl

•10+ year durability

•size is approximately 3inch x 2inch

Please note , Oil slick parts are the sticker only, There is no clear backing

Application:

1. Prepare - lay your decal on a flat surface. Use a squeegee or credit card to smooth over decal to ensure transfer tape adheres to the vinyl decal

2. Clean - clean the area you are applying the decal to with an appropriate cleaner (rubbing alcohol, glass cleaner). This step is very important. Make sure the area is super clean. A clean surface will insure decal life!

3. Take a break - take a break while you let the area dry fully.

4. Peel - starting in a corner, carefully peel the transfer tape and vinyl decal from the paper backing. If any parts of the decal don’t lift with the transfer tape, carefully lay the transfer tape back down and rub your thumb or finger over the decal area that isn’t coming up then peel off again

5. Apply - line your decal up. Place and stick down one side of your decal. Using a squeegee or credit card. Evenly smooth down the decal, working from one side to the other

6. Remove - Remove the transfer tape, starting at a corner peel away at a 45 degree angle. Only the sticker should remain

8. Enjoy - Sit back and enjoy your new decal